İDEAL veri terminalinde /Sistem/İndikatör/Robot

[yasarkoc79]

İyi akşamlar

bi sorgu konusunda yardımınız gerekiyor, benim istediğim 2 tarih aralığında ortalama hacmi yukarı kıranları listelemek ve hacim için de 1 milyon vb. şartlar koymak istiyorum, bu konuda yardımcı olur musunuz?

[alkan63]

Merhaba değerli dostlar nereye gittiysem istediğim formülü alamadım. Bana yardımcı olabilecek var mı? bir sorgu formülü yapmak istiyorum yardımcı olursanız minnetar olurum. Kalıbı basitçe anlatayım.

Dip ve Zirveleri tespit edecek ve son 5 dip ve zirve üzerinden karşılaştırma yapacak, şartları taşıyanı ekranda gösterecek. Basit bir karşılaştırma yazayım bana sadece bunu c# ideal dökerseniz gerisini ben yapabilirim. Testlerden sonra başarılı olması halinde tüm formülü ve stratejiyi sizinle paylaşırım.

X,A,B,C,D son beş dip ve zirve noktaları diyelim,

BA/XA =fibo 618 ile 786 arasında ise
BC/BA= Fibo 382-886 arasında ise
DA/XA =fibo 127-141 arasında ise
ve DC/BC=Fibo 1618-2224 arsında ise buna kelebek formasyonu diye yazacak.



kalıp bu şekilde eğer zor deniyorsa ücret dahi verebilirim. Şimdiden teşekkür ederim.

[Orhan AKDOĞAN]

Merhaba değerli dostlar nereye gittiysem istediğim formülü alamadım. Bana yardımcı olabilecek var mı? bir sorgu formülü yapmak istiyorum yardımcı olursanız minnetar olurum. Kalıbı basitçe anlatayım.

Dip ve Zirveleri tespit edecek ve son 5 dip ve zirve üzerinden karşılaştırma yapacak, şartları taşıyanı ekranda gösterecek. Basit bir karşılaştırma yazayım bana sadece bunu c# ideal dökerseniz gerisini ben yapabilirim. Testlerden sonra başarılı olması halinde tüm formülü ve stratejiyi sizinle paylaşırım.

X,A,B,C,D son beş dip ve zirve noktaları diyelim,

BA/XA =fibo 618 ile 786 arasında ise
BC/BA= Fibo 382-886 arasında ise
DA/XA =fibo 127-141 arasında ise
ve DC/BC=Fibo 1618-2224 arsında ise buna kelebek formasyonu diye yazacak.



kalıp bu şekilde eğer zor deniyorsa ücret dahi verebilirim. Şimdiden teşekkür ederim.

sorgu olduğu için son 5 noktayı ZigZagPeakThrough ile kolayca bulabilirsiniz. sezai bey bir kaç sayfa geride bunun örneğini paylaştı.

diğer harmonic değerlerde burada, dinamik yazılırsa kodlar sadece butterfly değil diğer harmonik patternlerde aynı kodla bitecektir.benden bu kadar, yazana kolay gelsin

   List<double> butterfly = new List<double>()     {0.786,0.786,0.382,0.886,1.618,2.618,1.272,1.618,0,0,0,0,0,0 };
   List<double> trendlike1_abcd = new List<double>()           {0,0,0.382,0.382,2.618,2.618,0,0,0,0,0,0,0,0};
   List<double> trendlike2_abcd = new List<double>()           {0,0,0.5,0.5,2.0,2.0,0,0,0,0,0,0,0,0};
   List<double> perfect_abcd = new List<double>()              {0,0,0.618,0.618,1.618,1.618,0,0,0,0,0,0,0,0};
   List<double> ideal1_abcd = new List<double>()               {0,0,0.707,0.707,1.41,1.41,0,0,0,0,0,0,0,0};
   List<double> ideal2_abcd = new List<double>()               {0,0,0.786,0.786,1.27,1.27,0,0,0,0,0,0,0,0};
   List<double> rangelike_abcd = new List<double>()            {0,0,0.886,0.886,1.13,1.13,0,0,0,0,0,0,0,0};
   List<double> alt127_trendlike1_abcd = new List<double>()    {0,0,0.382,0.382,2.618,3.618,0,0,0,0,0,0,1.272,1.272};
   List<double> alt127_trendlike2_abcd = new List<double>()    {0,0,0.5,0.5,2.0,3.618,0,0,0,0,0,0,1.272,1.272};
   List<double> alt127_perfect_abcd = new List<double>()       {0,0,0.618,0.618,1.618,3.618,0,0,0,0,0,0,1.272,1.272};
   List<double> alt127_ideal1_abcd = new List<double>()        {0,0,0.707,0.707,1.41,3.618,0,0,0,0,0,0,1.272,1.272};
   List<double> alt127_ideal2_abcd = new List<double>()        {0,0,0.786,0.786,1.27,3.618,0,0,0,0,0,0,1.272,1.272};
   List<double> alt127_rangelike_abcd = new List<double>()     {0,0,0.886,0.886,1.13,3.618,0,0,0,0,0,0,1.272,1.272};
   List<double> rec_trendlike1_abcd = new List<double>()       {0,0,2.618,2.618,0.382,0.382,0,0,0,0,0,0,0,0};
   List<double> rec_trendlike2_abcd = new List<double>()       {0,0,2.0,2.0,0.5,0.5,0,0,0,0,0,0,0,0};
   List<double> rec_perfect_abcd = new List<double>()          {0,0,1.618,1.618,0.618,0.618,0,0,0,0,0,0,0,0};
   List<double> rec_ideal1_abcd = new List<double>()           {0,0,1.41,1.41,0.707,0.707,0,0,0,0,0,0,0,0};
   List<double> rec_ideal2_abcd = new List<double>()           {0,0,1.27,1.27,0.786,0.786,0,0,0,0,0,0,0,0};
   List<double> rec_rangelike_abcd = new List<double>()        {0,0,1.13,1.13,0.886,0.886,0,0,0,0,0,0,0,0};
   List<double> gartley = new List<double>()       {0.618,0.618,0.382,0.886,1.272,1.618,0.786,0.786,0,0,0,0,0,0};
   List<double> bat = new List<double>()           {0.382,0.5,0.382,0.886,1.618,2.618,0.886,0.886,0,0,0,0,0,0 };
   List<double> altbat = new List<double>()        {0.382,0.382,0.382,0.886,2.0,3.618,1.13,1.13,0,0,0,0,0,0 };
   List<double> fiveo = new List<double>()         {1.13,1.618,1.618,2.24,0.5,0.5,0,0,0,0,0,0,0,0};
   List<double> crab = new List<double>()          {0.382,0.618,0.382,0.886,2.24,3.618,1.618,1.618,0,0,0,0,0,0 };
   List<double> deepcrab = new List<double>()      {0.886,0.886,0.382,0.886,2.0,3.618,1.618,1.618,0,0,0,0,0,0 };
   List<double> threedrives = new List<double>()   {1.272,1.618,0.618,0.786,1.272,1.618,0,0,0,0,0,0,0,0};
   List<double> shark = new List<double>()         {0,0,1.13,1.618,1.618,2.24,0,0,0.886,1.13,0,0,0,0};
   List<double> cypher = new List<double>()        {0.382,0.618,0,0,0,0,0,0,0.786,0.786,1.13,1.414,0,0};
   List<double> nenstar = new List<double>()       {0.382,0.618,0,0,0,0,0,0,1.272,1.272,1.13,1.414,0,0};
   List<double> blackswan = new List<double>()     {1.382,2.618,0.236,0.5,1.128,2,1.128,2.618,0,0,0,0,0,0};
   List<double> whiteswan = new List<double>()     {0.382,0.724,2,4.237,0.5,0.886,0.382,0.886,0,0,0,0,0,0};
   List<double> one2one = new List<double>()       {0.5,0.786,1.128,3.618,0.382,0.786,0.382,0.786,0,0,0,0,0,0};
   List<double> newcypher = new List<double>()     {0.382,0.618,0,0,0,0,0,0,0.786,0.786,1.414,2.14,0,0};
   List<double> navarro200 = new List<double>()    {0.382,0.786,0.886,1.128,0.886,3.618,0.886,1.128,0,0,0,0,0,0};
   List<double> leonardo = new List<double>()      {0.5,0.5,0.382,0.886,1.128,2.618,0.786,0.786,0,0,0,0,0,0};
   List<double> kane = new List<double>()          {0.685,0.685,0.382,0.886,0,0,1.460,1.460,0,0,0,0,0,0};
   List<double> garfly = new List<double>()        {0.618,0.618,0.382,0.886,1.618,2.24,1.272,1.272,0,0,0,0,0,0};
   List<double> maxbat = new List<double>()        {0.382,0.618,0.382,0.886,1.272,2.618,0.886,0.886,0,0,0,0,0,0};
   List<double> maxgartley = new List<double>()    {0.382,0.618,0.382,0.886,1.128,2.236,0.618,0.786,0,0,0,0,0,0};
   List<double> maxbutterfly = new List<double>()  {0.618,0.886,0.382,0.886,1.272,2.618,1.272,1.618,0,0,0,0,0,0};
   List<double> gartley113 = new List<double>()    {0.618,0.618,0.382,0.886,1.13,1.13,0.786,0.786,0,0,0,0,0,0};
   List<double> butterfly113 = new List<double>()  {0.786,1,0.618,1,1.128,1.618,1.128,1.128,0,0,0,0,0,0 };
   List<double> anti_gartley = new List<double>()        {0.618,0.786,1.129,2.618,1.618,1.618,1.272,1.272,0,0,0,0,0,0};
   List<double> anti_bat = new List<double>()            {0.382,0.618,1.129,2.618,2.000,2.618,1.129,1.129,0,0,0,0,0,0};
   List<double> anti_altbat = new List<double>()         {0.276,0.500,1.129,2.618,2.618,2.618,0.885,0.885,0,0,0,0,0,0};
   List<double> anti_fiveo = new List<double>()          {2.000,2.000,0.446,0.618,0.618,0.885,0,0,0,0,0,0,0,0};
   List<double> anti_butterfly = new List<double>()      {0.382,0.618,1.129,2.618,1.272,1.272,0.618,0.786,0,0,0,0,0,0};
   List<double> anti_crab = new List<double>()           {0.276,0.446,1.129,2.618,1.618,2.618,0.618,0.618,0,0,0,0,0,0};
   List<double> anti_deepcrab = new List<double>()       {0.276,0.500,1.129,2.618,1.129,1.129,0.618,0.618,0,0,0,0,0,0};
   List<double> anti_threedrives = new List<double>()    {0.618,0.786,1.272,1.618,0.618,0.786,0,0,0,0,0,0,0,0};
   List<double> anti_shark = new List<double>()          {0.446,0.618,0.618,0.885,0,0,0,0,0.885,1.129,0,0,0,0};
   List<double> anti_cypher = new List<double>()         {0,0,0,0,1.618,2.618,0,0,1.272,1.272,0.707,0.885,0,0};
   List<double> anti_nenstar = new List<double>()        {0,0,0,0,1.618,2.618,0,0,0.786,0.786,0.707,0.885,0,0};
   List<double> anti_blackswan = new List<double>()      {0.500,0.887,2.000,4.237,0.382,0.724,0.382,0.887,0,0,0,0,0,0};
   List<double> anti_whiteswan = new List<double>()      {1.129,2.000,0.236,0.500,1.381,2.618,1.129,2.618,0,0,0,0,0,0};
   List<double> anti_one2one = new List<double>()        {1.272,2.618,0.276,0.887,1.272,2.000,1.272,2.618,0,0,0,0,0,0};
   List<double> anti_newcypher = new List<double>()      {0,0,0,0,1.618,2.618,0,0,1.272,1.272,0.467,0.707,0,0};
   List<double> anti_navarro200 = new List<double>()     {0.276,1.129,0.887,1.129,1.272,2.618,0.887,1.129,0,0,0,0,0,0};
   List<double> anti_leonardo = new List<double>()       {0.382,0.887,1.129,2.618,2.000,2.000,1.272,1.272,0,0,0,0,0,0};
   List<double> anti_kane = new List<double>()           {0,0,1.129,2.618,1.460,1.460,0.685,0.685,0,0,0,0,0,0};
   List<double> anti_garfly = new List<double>()         {0.446,0.618,1.129,2.618,1.618,1.618,0.786,0.786,0,0,0,0,0,0};
   List<double> anti_maxbat = new List<double>()         {0.382,0.786,1.129,2.618,1.618,2.618,1.129,1.129,0,0,0,0,0,0};
   List<double> anti_maxgartley = new List<double>()     {0.447,0.887,1.129,2.618,1.618,2.618,1.272,1.618,0,0,0,0,0,0};
   List<double> anti_maxbutterfly = new List<double>()   {0.382,0.786,1.129,2.618,1.129,1.618,0.618,0.786,0,0,0,0,0,0};
   List<double> anti_gartley113 = new List<double>()     {0.885,0.885,1.129,2.618,1.618,1.618,1.272,1.272,0,0,0,0,0,0};
   List<double> anti_butterfly113 = new List<double>()   {0.618,0.887,1.000,1.618,1.000,1.272,0.887,0.887,0,0,0,0,0,0}; 

[Orhan AKDOĞAN]

arkadaşlar nedenini anlamadım ama özelden filtre ile ilgili sorular geliyor düzenli olarak.genelden yazıp kapatıyorum bu konuyu.
forumda 2015 yılında paylaşılan pek çok filtre var. son zamanda idealin eklediği yeni pek çok filtre var.bunları deneyip kendi sisteminiz için en uygun olanını bulmak size kalmış. tek dokunuşla her şeyi mükemmel yapan bir filtre arıyorsanız öyle bir şey yok.
ben ana sistemimde filtre kullanmıyorum ama bazı sistemlerim de sn anonimin forumda paylaştığı chebyshev filter'in revize edilmiş halini kullanıyorum.

[alkan63]

sorgu olduğu için son 5 noktayı ZigZagPeakThrough ile kolayca bulabilirsiniz. sezai bey bir kaç sayfa geride bunun örneğini paylaştı.

diğer harmonic değerlerde burada, dinamik yazılırsa kodlar sadece butterfly değil diğer harmonik patternlerde aynı kodla bitecektir.benden bu kadar, yazana kolay gelsin

   List<double> butterfly = new List<double>()     {0.786,0.786,0.382,0.886,1.618,2.618,1.272,1.618,0,0,0,0,0,0 };
   List<double> trendlike1_abcd = new List<double>()           {0,0,0.382,0.382,2.618,2.618,0,0,0,0,0,0,0,0};
   List<double> trendlike2_abcd = new List<double>()           {0,0,0.5,0.5,2.0,2.0,0,0,0,0,0,0,0,0};
   List<double> perfect_abcd = new List<double>()              {0,0,0.618,0.618,1.618,1.618,0,0,0,0,0,0,0,0};
   List<double> ideal1_abcd = new List<double>()               {0,0,0.707,0.707,1.41,1.41,0,0,0,0,0,0,0,0};
   List<double> ideal2_abcd = new List<double>()               {0,0,0.786,0.786,1.27,1.27,0,0,0,0,0,0,0,0};
   List<double> rangelike_abcd = new List<double>()            {0,0,0.886,0.886,1.13,1.13,0,0,0,0,0,0,0,0};
   List<double> alt127_trendlike1_abcd = new List<double>()    {0,0,0.382,0.382,2.618,3.618,0,0,0,0,0,0,1.272,1.272};
   List<double> alt127_trendlike2_abcd = new List<double>()    {0,0,0.5,0.5,2.0,3.618,0,0,0,0,0,0,1.272,1.272};
   List<double> alt127_perfect_abcd = new List<double>()       {0,0,0.618,0.618,1.618,3.618,0,0,0,0,0,0,1.272,1.272};
   List<double> alt127_ideal1_abcd = new List<double>()        {0,0,0.707,0.707,1.41,3.618,0,0,0,0,0,0,1.272,1.272};
   List<double> alt127_ideal2_abcd = new List<double>()        {0,0,0.786,0.786,1.27,3.618,0,0,0,0,0,0,1.272,1.272};
   List<double> alt127_rangelike_abcd = new List<double>()     {0,0,0.886,0.886,1.13,3.618,0,0,0,0,0,0,1.272,1.272};
   List<double> rec_trendlike1_abcd = new List<double>()       {0,0,2.618,2.618,0.382,0.382,0,0,0,0,0,0,0,0};
   List<double> rec_trendlike2_abcd = new List<double>()       {0,0,2.0,2.0,0.5,0.5,0,0,0,0,0,0,0,0};
   List<double> rec_perfect_abcd = new List<double>()          {0,0,1.618,1.618,0.618,0.618,0,0,0,0,0,0,0,0};
   List<double> rec_ideal1_abcd = new List<double>()           {0,0,1.41,1.41,0.707,0.707,0,0,0,0,0,0,0,0};
   List<double> rec_ideal2_abcd = new List<double>()           {0,0,1.27,1.27,0.786,0.786,0,0,0,0,0,0,0,0};
   List<double> rec_rangelike_abcd = new List<double>()        {0,0,1.13,1.13,0.886,0.886,0,0,0,0,0,0,0,0};
   List<double> gartley = new List<double>()       {0.618,0.618,0.382,0.886,1.272,1.618,0.786,0.786,0,0,0,0,0,0};
   List<double> bat = new List<double>()           {0.382,0.5,0.382,0.886,1.618,2.618,0.886,0.886,0,0,0,0,0,0 };
   List<double> altbat = new List<double>()        {0.382,0.382,0.382,0.886,2.0,3.618,1.13,1.13,0,0,0,0,0,0 };
   List<double> fiveo = new List<double>()         {1.13,1.618,1.618,2.24,0.5,0.5,0,0,0,0,0,0,0,0};
   List<double> crab = new List<double>()          {0.382,0.618,0.382,0.886,2.24,3.618,1.618,1.618,0,0,0,0,0,0 };
   List<double> deepcrab = new List<double>()      {0.886,0.886,0.382,0.886,2.0,3.618,1.618,1.618,0,0,0,0,0,0 };
   List<double> threedrives = new List<double>()   {1.272,1.618,0.618,0.786,1.272,1.618,0,0,0,0,0,0,0,0};
   List<double> shark = new List<double>()         {0,0,1.13,1.618,1.618,2.24,0,0,0.886,1.13,0,0,0,0};
   List<double> cypher = new List<double>()        {0.382,0.618,0,0,0,0,0,0,0.786,0.786,1.13,1.414,0,0};
   List<double> nenstar = new List<double>()       {0.382,0.618,0,0,0,0,0,0,1.272,1.272,1.13,1.414,0,0};
   List<double> blackswan = new List<double>()     {1.382,2.618,0.236,0.5,1.128,2,1.128,2.618,0,0,0,0,0,0};
   List<double> whiteswan = new List<double>()     {0.382,0.724,2,4.237,0.5,0.886,0.382,0.886,0,0,0,0,0,0};
   List<double> one2one = new List<double>()       {0.5,0.786,1.128,3.618,0.382,0.786,0.382,0.786,0,0,0,0,0,0};
   List<double> newcypher = new List<double>()     {0.382,0.618,0,0,0,0,0,0,0.786,0.786,1.414,2.14,0,0};
   List<double> navarro200 = new List<double>()    {0.382,0.786,0.886,1.128,0.886,3.618,0.886,1.128,0,0,0,0,0,0};
   List<double> leonardo = new List<double>()      {0.5,0.5,0.382,0.886,1.128,2.618,0.786,0.786,0,0,0,0,0,0};
   List<double> kane = new List<double>()          {0.685,0.685,0.382,0.886,0,0,1.460,1.460,0,0,0,0,0,0};
   List<double> garfly = new List<double>()        {0.618,0.618,0.382,0.886,1.618,2.24,1.272,1.272,0,0,0,0,0,0};
   List<double> maxbat = new List<double>()        {0.382,0.618,0.382,0.886,1.272,2.618,0.886,0.886,0,0,0,0,0,0};
   List<double> maxgartley = new List<double>()    {0.382,0.618,0.382,0.886,1.128,2.236,0.618,0.786,0,0,0,0,0,0};
   List<double> maxbutterfly = new List<double>()  {0.618,0.886,0.382,0.886,1.272,2.618,1.272,1.618,0,0,0,0,0,0};
   List<double> gartley113 = new List<double>()    {0.618,0.618,0.382,0.886,1.13,1.13,0.786,0.786,0,0,0,0,0,0};
   List<double> butterfly113 = new List<double>()  {0.786,1,0.618,1,1.128,1.618,1.128,1.128,0,0,0,0,0,0 };
   List<double> anti_gartley = new List<double>()        {0.618,0.786,1.129,2.618,1.618,1.618,1.272,1.272,0,0,0,0,0,0};
   List<double> anti_bat = new List<double>()            {0.382,0.618,1.129,2.618,2.000,2.618,1.129,1.129,0,0,0,0,0,0};
   List<double> anti_altbat = new List<double>()         {0.276,0.500,1.129,2.618,2.618,2.618,0.885,0.885,0,0,0,0,0,0};
   List<double> anti_fiveo = new List<double>()          {2.000,2.000,0.446,0.618,0.618,0.885,0,0,0,0,0,0,0,0};
   List<double> anti_butterfly = new List<double>()      {0.382,0.618,1.129,2.618,1.272,1.272,0.618,0.786,0,0,0,0,0,0};
   List<double> anti_crab = new List<double>()           {0.276,0.446,1.129,2.618,1.618,2.618,0.618,0.618,0,0,0,0,0,0};
   List<double> anti_deepcrab = new List<double>()       {0.276,0.500,1.129,2.618,1.129,1.129,0.618,0.618,0,0,0,0,0,0};
   List<double> anti_threedrives = new List<double>()    {0.618,0.786,1.272,1.618,0.618,0.786,0,0,0,0,0,0,0,0};
   List<double> anti_shark = new List<double>()          {0.446,0.618,0.618,0.885,0,0,0,0,0.885,1.129,0,0,0,0};
   List<double> anti_cypher = new List<double>()         {0,0,0,0,1.618,2.618,0,0,1.272,1.272,0.707,0.885,0,0};
   List<double> anti_nenstar = new List<double>()        {0,0,0,0,1.618,2.618,0,0,0.786,0.786,0.707,0.885,0,0};
   List<double> anti_blackswan = new List<double>()      {0.500,0.887,2.000,4.237,0.382,0.724,0.382,0.887,0,0,0,0,0,0};
   List<double> anti_whiteswan = new List<double>()      {1.129,2.000,0.236,0.500,1.381,2.618,1.129,2.618,0,0,0,0,0,0};
   List<double> anti_one2one = new List<double>()        {1.272,2.618,0.276,0.887,1.272,2.000,1.272,2.618,0,0,0,0,0,0};
   List<double> anti_newcypher = new List<double>()      {0,0,0,0,1.618,2.618,0,0,1.272,1.272,0.467,0.707,0,0};
   List<double> anti_navarro200 = new List<double>()     {0.276,1.129,0.887,1.129,1.272,2.618,0.887,1.129,0,0,0,0,0,0};
   List<double> anti_leonardo = new List<double>()       {0.382,0.887,1.129,2.618,2.000,2.000,1.272,1.272,0,0,0,0,0,0};
   List<double> anti_kane = new List<double>()           {0,0,1.129,2.618,1.460,1.460,0.685,0.685,0,0,0,0,0,0};
   List<double> anti_garfly = new List<double>()         {0.446,0.618,1.129,2.618,1.618,1.618,0.786,0.786,0,0,0,0,0,0};
   List<double> anti_maxbat = new List<double>()         {0.382,0.786,1.129,2.618,1.618,2.618,1.129,1.129,0,0,0,0,0,0};
   List<double> anti_maxgartley = new List<double>()     {0.447,0.887,1.129,2.618,1.618,2.618,1.272,1.618,0,0,0,0,0,0};
   List<double> anti_maxbutterfly = new List<double>()   {0.382,0.786,1.129,2.618,1.129,1.618,0.618,0.786,0,0,0,0,0,0};
   List<double> anti_gartley113 = new List<double>()     {0.885,0.885,1.129,2.618,1.618,1.618,1.272,1.272,0,0,0,0,0,0};
   List<double> anti_butterfly113 = new List<double>()   {0.618,0.887,1.000,1.618,1.000,1.272,0.887,0.887,0,0,0,0,0,0}; 

çok teşekkür ederim, Sezai hocamın zigzag formülü ile

var Z = Sistem.ZigZagPeakThrough(C,1, 3);
var Peak = Z.Peak;
var Through = Z.Through;
var PeakBars = Z.PeakBars;
var ThroughBars = Z.ThroughBars;

Sistem.Cizgiler[0].Deger = Peak;
Sistem.Cizgiler[1].Deger = Through;
Sistem.Cizgiler[2].Deger = PeakBars;
Sistem.Cizgiler[3].Deger = ThroughBars; 

baştaki listeyi uyarlayacak bir yiğit çıktı gerisi halolur gibi...

[adov]

Arkadaşlar, Kullanıcı Tanımlı bir endeks oluşturduğum zaman(INX), RSI indicator penceresinden eklediğimde hiç bir sorun olmadan ekliyor. Fakat grafiğin üzerine sistem atamıyorum. Bu neden olabilir?

[adov]

Sezai Bey, sağolsun yardımcı oldu. şuanki yapı dagilinde INX lere sistem atılamıyormuş.

[berryforeva]

Merhabalar,
iDeal yetkilileri burayı takip ediyor bildiğim kadarıyla, o bakımdan buraya yazayım dedim.

Terminalden çok memnunum, ihtiyaçlarımı karşılıyor. Ancak bir ufacıkta olsa terminalde eksiklikler var. Terminalde "HotKey" yani "Kısayol Tuşları" olsa benim gibi Robot değil de, manuel işlem yapanlar için çok iyi olurdu.

Mesela ekranı izliyorum, istediğim rakama geldi o anda emir yollayacağım, Portföy sayfasından ziyade ben F1 'e bastığım da mesela F1 'e 5BIN LOT ALIM atadım, buna bastıkça AKTİF fiyattan emir yollayacak. F2 'de tam tersi Satış için emir yollayacak.

Bence bu tür DayTrader diye tabir ettiğimiz kişiler için yapılsa İdeal vazgeçilmez bir hal alır. Umarım yöneticiler dikkate alır.