Slm. Tradingview hakknda yardm rica edecektim. Pro yeliim mevcut. Ancak BST'te hacim verilerini gremiyorum. Sanrm yeliim bu hizmeti kapsamyor. yeliimi mi ykseltmem gerekiyor bilemiyorum. Bu konuda yardmc olabilirseniz sevinirim.
Yeni ye
Slm. Tradingview hakknda yardm rica edecektim. Pro yeliim mevcut. Ancak BST'te hacim verilerini gremiyorum. Sanrm yeliim bu hizmeti kapsamyor. yeliimi mi ykseltmem gerekiyor bilemiyorum. Bu konuda yardmc olabilirseniz sevinirim.
Gm ye
Merhabalar.
Sadece spot piyasada ilem yapyor ve hacim verisine ihtiya duyan bir sistem kullanmyorsanz ve ikametiniz Trkiye ise...:
1 USD' ye :
BIST oklu Hisse Senetleri
VADEL LEMLER
BST 100
BST 30
Borsa stanbul (Hacim verisi dahil deildir.) (Trkiye'de ikamet edenler iin)
Vadeli istiyorsanz:
BIST Vadeli lemler
Borsa Istanbul (Trkiye'de ikamet edenler iin)
$5 ABD/ayda
"Hepsi lazm" diyorsanz:
BISTHSSE SENETLER
ENDEKSLER
Borsa Istanbul (Trkiye'de ikamet edenler iin)
Aada:
Mevcut Piyasalar altnda, "Avrupa-Trkiye" seiniz.
cretli Tarifeler & Ek zellikler €šššššš‚ ššššš TradingView
EK:
Zaten hacim sormusunuz...
Pardon.
Bunu satn aln. 7 USD/AY :
BISTHSSE SENETLER
ENDEKSLER
Borsa Istanbul (Trkiye'de ikamet edenler iin)
$7 ABD/ayda
https://www.kisavade.com/
Al,sat,tut,yakala,sk,brak vb. tavsiye iin arac kurumunuzla grn.
Yeni ye
Teekkrler stat. ok yardmc oldunuz.Originally Posted by obblomovv
Gm ye
Estafurullah. Bol kazanlar.
https://www.kisavade.com/
Al,sat,tut,yakala,sk,brak vb. tavsiye iin arac kurumunuzla grn.
Bronz ye
Bir sredir buraya yazmamz.
Madem haftasonu ve vakit var...
Birilerinin iine yararsa diye,
Kullanl(bence) OHCL(Open, High, Close, Low veya Al, Yksek, Kapan, Dk) rnei verelim.
"OHCL ne ie yarar, nerelerde kullanabiliriz?" konusunu da burada:
https://www.hisse.net/topluluk/showt...=51596&page=25
ve burada:
https://www.hisse.net/topluluk/showthread.php?t=47874
Gemite ilemitik. Gerekirse yeniden yazarz.
Kod' a ait ekran grntleri:
1-Gnlk grafik:
2-Haftalk grafie gnlk periyoddan bak:
Kodu yazmadan nce unu da ekleyeyim:
Bu kodun olduu grafikler paylanca,
ilgili kodun yaratt grnty, sorunlu grafik veya ekranda "kayma" var eklinde deerlndirenler oldu.
"Ok" la iaretlediim simgeler(barlar) nceki bara ait OHCL deerleridir.
Gnlk grafie, nceki gnn OHCL mumunu koymak aptalca gzkebilir.
Yani birileri diyebilir ki; "Bir nceki bar zaten ben de grebiliyorum".
Bu mevzuyu aada aklamaya alacam.
rnein;
2 numaral grafikte "Haftalk grafie gnlk bak" attmz iin,
5 adet gnlk bar boyunca, "Geen Hafta" nn OHCL sini ieren mumu gryoruz.
Ayn eyi "Haftalk Grafik" ten, Aylk OHCL ye bakmak iin yapsaydk,
grnt yle olacakt:
Peki manyak myz? Neden mumlar kullanyoruz?
Grnt bozulmas gibi durmuyor mu?
Onu da yle aklayaym:
Tradingview' de pro hesap kullanmadmz srece 3 gsterge sdrabiliyoruz bir ekrana.
Bu durumda:
1-Bar deil de, izgilerle de yerletirebiliriz bu gstergeyi ekranmza. Ancak,
2-izgiler ieren baka bir gsterge kullandmzda ekranmzn orbaya dnmesini engelliyor,
yani gsterge haklarmzdan birini boa kullanmak zorunda kalmyoruz.
Hemen rnek vereyim(Haftalk Ichimoku ile birlikte Haftalk OHCL' ye Gnlk grafikten bak):
Son olarak da kodumuz:
Kod://@version=5 indicator(title='OHLC', overlay=true) res = input.timeframe(title='Time Frame', defval='W') bc = request.security(syminfo.tickerid, res, close[1]) bl = request.security(syminfo.tickerid, res, low[1]) bh = request.security(syminfo.tickerid, res, high[1]) bo = request.security(syminfo.tickerid, res, open[1]) colr = color.new(#ff1493, 85) colg = color.new(#caff70, 85) plotcandle(bo, bh, bl, bc, color=bc < bo ? colr : colg, bordercolor=bc < bo ? colr : colg, wickcolor=bc < bo ? colr : colg)
res = input.timeframe(title='Time Frame', defval='W')
Bu satrdaki defval='W'
W deikeni grafiiniz hangi periyodda ak olursa olsun,
OHCL deerinin geen haftaya ait olmasn salar.
Gnlk iin = "D"
Aylk iin = "M"
3 Aylk iin = "3M"
Yllk Aylk iin = "12M"
deerlerini kullanabilirsiniz...
Kolay gelsin. Bol kazanlar.
ye
Pro yelii olmadan 1 dolarlk hizmet alnabiliyormu?
Bronz ye
"Normal yollardan..." Hayr.
Ancak her ay baka bir browser(edge, exporer, chrome vb...) ile veya browser belleini temizleyip, yeni bir sanal kartla bele pro alanlar biliyorum...
Tabi bir de yeni bir hesap lazm. E-posta, Facebook, Google, twitter vb.
Bir arkada yazd formlleri nasl yeni hesaba kolayca tadn da yazmt Twitter' da.
Bulursam onu da paylarm.
Yeni ye
merhabalar bir tradingview kodu iin yardm isteyecektim, kodun ideale evrilmesi ile ilgili ideal dataya bavurdum ama pine script dilini bilmediklerini sylediler. Kod biraz uzun, ok zor bir kod deilse yardm rica ediyorum .
study("SSL Hybrid", overlay=true)
show_Baseline = input(title="Show Baseline", type=input.bool, defval=true)
show_SSL1 = input(title="Show SSL1", type=input.bool, defval=false)
show_atr = input(title="Show ATR bands", type=input.bool, defval=true)
//ATR
atrlen = input(14, "ATR Period")
mult = input(1, "ATR Multi", step=0.1)
smoothing = input(title="ATR Smoothing", defval="WMA", options=["RMA", "SMA", "EMA", "WMA"])
ma_function(source, atrlen) =>
if smoothing == "RMA"
rma(source, atrlen)
else
if smoothing == "SMA"
sma(source, atrlen)
else
if smoothing == "EMA"
ema(source, atrlen)
else
wma(source, atrlen)
atr_slen = ma_function(tr(true), atrlen)
////ATR Up/Low Bands
upper_band = atr_slen * mult + close
lower_band = close - atr_slen * mult
////BASELINE / SSL1 / SSL2 / EXIT MOVING AVERAGE VALUES
maType = input(title="SSL1 / Baseline Type", type=input.string, defval="HMA", options=["SMA","EMA","DEMA","TEMA","LSMA","WMA","MF","VAMA" ,"TMA","HMA", "JMA", "Kijun v2", "EDSMA","McGinley"])
len = input(title="SSL1 / Baseline Length", defval=60)
SSL2Type = input(title="SSL2 / Continuation Type", type=input.string, defval="JMA", options=["SMA","EMA","DEMA","TEMA","WMA","MF","VAMA","TMA", "HMA", "JMA","McGinley"])
len2 = input(title="SSL 2 Length", defval=5)
//
SSL3Type = input(title="EXIT Type", type=input.string, defval="HMA", options=["DEMA","TEMA","LSMA","VAMA","TMA","HMA","JMA", "Kijun v2", "McGinley", "MF"])
len3 = input(title="EXIT Length", defval=15)
src = input(title="Source", type=input.source, defval=close)
//
tema(src, len) =>
ema1 = ema(src, len)
ema2 = ema(ema1, len)
ema3 = ema(ema2, len)
(3 * ema1) - (3 * ema2) + ema3
kidiv = input(defval=1,maxval=4, title="Kijun MOD Divider")
jurik_phase = input(title="* Jurik (JMA) Only - Phase", type=input.integer, defval=3)
jurik_power = input(title="* Jurik (JMA) Only - Power", type=input.integer, defval=1)
volatility_lookback = input(10, title="* Volatility Adjusted (VAMA) Only - Volatility lookback length")
//MF
beta = input(0.8,minval=0,maxval=1,step=0.1, title="Modular Filter, General Filter Only - Beta")
feedback = input(false, title="Modular Filter Only - Feedback")
z = input(0.5,title="Modular Filter Only - Feedback Weighting",step=0.1, minval=0, maxval=1)
//EDSMA
ssfLength = input(title="EDSMA - Super Smoother Filter Length", type=input.integer, minval=1, defval=20)
ssfPoles = input(title="EDSMA - Super Smoother Filter Poles", type=input.integer, defval=2, options=[2, 3])
//----
//EDSMA
get2PoleSSF(src, length) =>
PI = 2 * asin(1)
arg = sqrt(2) * PI / length
a1 = exp(-arg)
b1 = 2 * a1 * cos(arg)
c2 = b1
c3 = -pow(a1, 2)
c1 = 1 - c2 - c3
ssf = 0.0
ssf := c1 * src + c2 * nz(ssf[1]) + c3 * nz(ssf[2])
get3PoleSSF(src, length) =>
PI = 2 * asin(1)
arg = PI / length
a1 = exp(-arg)
b1 = 2 * a1 * cos(1.738 * arg)
c1 = pow(a1, 2)
coef2 = b1 + c1
coef3 = -(c1 + b1 * c1)
coef4 = pow(c1, 2)
coef1 = 1 - coef2 - coef3 - coef4
ssf = 0.0
ssf := coef1 * src + coef2 * nz(ssf[1]) + coef3 * nz(ssf[2]) + coef4 * nz(ssf[3])
ma(type, src, len) =>
float result = 0
if type=="TMA"
result := sma(sma(src, ceil(len / 2)), floor(len / 2) + 1)
if type=="MF"
ts=0.,b=0.,c=0.,os=0.
//----
alpha = 2/(len+1)
a = feedback ? z*src + (1-z)*nz(ts[1],src) : src
//----
b := a > alpha*a+(1-alpha)*nz(b[1],a) ? a : alpha*a+(1-alpha)*nz(b[1],a)
c := a < alpha*a+(1-alpha)*nz(c[1],a) ? a : alpha*a+(1-alpha)*nz(c[1],a)
os := a == b ? 1 : a == c ? 0 : os[1]
//----
upper = beta*b+(1-beta)*c
lower = beta*c+(1-beta)*b
ts := os*upper+(1-os)*lower
result := ts
if type=="LSMA"
result := linreg(src, len, 0)
if type=="SMA" // Simple
result := sma(src, len)
if type=="EMA" // Exponential
result := ema(src, len)
if type=="DEMA" // Double Exponential
e = ema(src, len)
result := 2 * e - ema(e, len)
if type=="TEMA" // Triple Exponential
e = ema(src, len)
result := 3 * (e - ema(e, len)) + ema(ema(e, len), len)
if type=="WMA" // Weighted
result := wma(src, len)
if type=="VAMA" // Volatility Adjusted
/// Copyright 2019 to present, Joris Duyck (JD)
mid=ema(src,len)
dev=src-mid
vol_up=highest(dev,volatility_lookback)
vol_down=lowest(dev,volatility_lookback)
result := mid+avg(vol_up,vol_down)
if type=="HMA" // Hull
result := wma(2 * wma(src, len / 2) - wma(src, len), round(sqrt(len)))
if type=="JMA" // Jurik
/// Copyright 2018 Alex Orekhov (everget)
/// Copyright 2017 Jurik Research and Consulting.
phaseRatio = jurik_phase < -100 ? 0.5 : jurik_phase > 100 ? 2.5 : jurik_phase / 100 + 1.5
beta = 0.45 * (len - 1) / (0.45 * (len - 1) + 2)
alpha = pow(beta, jurik_power)
jma = 0.0
e0 = 0.0
e0 := (1 - alpha) * src + alpha * nz(e0[1])
e1 = 0.0
e1 := (src - e0) * (1 - beta) + beta * nz(e1[1])
e2 = 0.0
e2 := (e0 + phaseRatio * e1 - nz(jma[1])) * pow(1 - alpha, 2) + pow(alpha, 2) * nz(e2[1])
jma := e2 + nz(jma[1])
result := jma
if type=="Kijun v2"
kijun = avg(lowest(len), highest(len))//, (open + close)/2)
conversionLine = avg(lowest(len/kidiv), highest(len/kidiv))
delta = (kijun + conversionLine)/2
result :=delta
if type=="McGinley"
mg = 0.0
mg := na(mg[1]) ? ema(src, len) : mg[1] + (src - mg[1]) / (len * pow(src/mg[1], 4))
result :=mg
if type=="EDSMA"
zeros = src - nz(src[2])
avgZeros = (zeros + zeros[1]) / 2
// Ehlers Super Smoother Filter
ssf = ssfPoles == 2
? get2PoleSSF(avgZeros, ssfLength)
: get3PoleSSF(avgZeros, ssfLength)
// Rescale filter in terms of Standard Deviations
stdev = stdev(ssf, len)
scaledFilter = stdev != 0
? ssf / stdev
: 0
alpha = 5 * abs(scaledFilter) / len
edsma = 0.0
edsma := alpha * src + (1 - alpha) * nz(edsma[1])
result := edsma
result
///SSL 1 and SSL2
emaHigh = ma(maType, high, len)
emaLow = ma(maType, low, len)
maHigh = ma(SSL2Type, high, len2)
maLow = ma(SSL2Type, low, len2)
///EXIT
ExitHigh = ma(SSL3Type, high, len3)
ExitLow = ma(SSL3Type, low, len3)
///Keltner Baseline Channel
BBMC = ma(maType, close, len)
useTrueRange = input(true)
multy = input(0.2, step=0.05, title="Base Channel Multiplier")
Keltma = ma(maType, src, len)
range = useTrueRange ? tr : high - low
rangema = ema(range, len)
upperk =Keltma + rangema * multy
lowerk = Keltma - rangema * multy
//Baseline Violation Candle
open_pos = open*1
close_pos = close*1
difference = abs(close_pos-open_pos)
atr_violation = difference > atr_slen
InRange = upper_band > BBMC and lower_band < BBMC
candlesize_violation = atr_violation and InRange
plotshape(candlesize_violation, color=color.white, size=size.tiny,style=shape.diamond, location=location.top, transp=0,title="Candle Size > 1xATR")
//SSL1 VALUES
Hlv = int(na)
Hlv := close > emaHigh ? 1 : close < emaLow ? -1 : Hlv[1]
sslDown = Hlv < 0 ? emaHigh : emaLow
//SSL2 VALUES
Hlv2 = int(na)
Hlv2 := close > maHigh ? 1 : close < maLow ? -1 : Hlv2[1]
sslDown2 = Hlv2 < 0 ? maHigh : maLow
//EXIT VALUES
Hlv3 = int(na)
Hlv3 := close > ExitHigh ? 1 : close < ExitLow ? -1 : Hlv3[1]
sslExit = Hlv3 < 0 ? ExitHigh : ExitLow
base_cross_Long = crossover(close, sslExit)
base_cross_Short = crossover(sslExit, close)
codiff = base_cross_Long ? 1 : base_cross_Short ? -1 : na
//COLORS
show_color_bar = input(title="Color Bars", type=input.bool, defval=true)
color_bar = close > upperk ? #00c3ff : close < lowerk ? #ff0062 : color.gray
color_ssl1 = close > sslDown ? #00c3ff : close < sslDown ? #ff0062 : na
//PLOTS
plotarrow(codiff, colorup=#00c3ff, colordown=#ff0062,title="Exit Arrows", transp=20, maxheight=20, offset=0)
p1 = plot(show_Baseline ? BBMC : na, color=color_bar, linewidth=4,transp=0, title='MA Baseline')
DownPlot = plot( show_SSL1 ? sslDown : na, title="SSL1", linewidth=3, color=color_ssl1, transp=10)
barcolor(show_color_bar ? color_bar : na)
up_channel = plot(show_Baseline ? upperk : na, color=color_bar, title="Baseline Upper Channel")
low_channel = plot(show_Baseline ? lowerk : na, color=color_bar, title="Basiline Lower Channel")
fill(up_channel, low_channel, color=color_bar, transp=90)
////SSL2 Continiuation from ATR
atr_crit = input(0.9, step=0.1, title="Continuation ATR Criteria")
upper_half = atr_slen * atr_crit + close
lower_half = close - atr_slen * atr_crit
buy_inatr = lower_half < sslDown2
sell_inatr = upper_half > sslDown2
sell_cont = close < BBMC and close < sslDown2
buy_cont = close > BBMC and close > sslDown2
sell_atr = sell_inatr and sell_cont
buy_atr = buy_inatr and buy_cont
atr_fill = buy_atr ? color.green : sell_atr ? color.purple : color.white
LongPlot = plot(sslDown2, title="SSL2", linewidth=2, color=atr_fill, style=plot.style_circles, transp=0)
u = plot(show_atr ? upper_band : na, "+ATR", color=color.white, transp=80)
l = plot(show_atr ? lower_band : na, "-ATR", color=color.white, transp=80)
//ALERTS
alertcondition(crossover(close, sslDown), title='SSL Cross Alert', message='SSL1 has crossed.')
alertcondition(crossover(close, sslDown2), title='SSL2 Cross Alert', message='SSL2 has crossed.')
alertcondition(sell_atr, title='Sell Continuation', message='Sell Continuation.')
alertcondition(buy_atr, title='Buy Continuation', message='Buy Continuation.')
alertcondition(crossover(close, sslExit), title='Exit Sell', message='Exit Sell Alert.')
alertcondition(crossover(sslExit, close), title='Exit Buy', message='Exit Buy Alert.')
alertcondition(crossover(close, upperk ), title='Baseline Buy Entry', message='Base Buy Alert.')
alertcondition(crossover(lowerk, close ), title='Baseline Sell Entry', message='Base Sell Alert.')
Gnderi Kurallar
Alnt yaparak yantla
Yer mleri